metaremun – Метарем ЕАД

1-AXLE TRANSPORT TRAILER KT

The single-axle transport trailer KT is used for transportation of grain headers and other attachments for different types of combine harvesters.
Supports can be moved and adjusted according to the type of the header. A grain header with a suspended attachment for rapeseed can be transported on them, but for this purpose, extensions need to be mounted beforehand.
To support the trailer in a static position, an auxiliary wheel is mounted on the front, which can be adjusted in height.

HAMMER MILL DC120

The hammer mill DC-120 is designed for milling fodder and crushing materials such as wood chips for the production of wood pellets. It can be used to mill hay, straw, corn cobs, grain feed, and other materials.
The machine is equipped with a cyclone.

RAPESEED ATTACHMENT PR

METAREM offers attachments for harvesting rapeseed, which can be mounted on combine harvesters with a working width of 4.5m to 7.5m. The attachment minimizes losses during the rapeseed harvesting process. It is easy and quick to install without the need for special tools. The side vertical knives reduce vibrations and increase productivity, and if necessary, the right knife can be turned off.

ROTARY NEEDLE HARROW BRI

Тhe needle harrow BRI is used for soil preparation and weed control. Its primary purpose is to break up the soil and create a smooth, level surface for planting. It also helps to aerate the soil by creating small holes that allow water and nutrients to penetrate deeper into the ground. In addition, the needles can be used to control weeds by disrupting their growth and exposing their roots to the sun.

Techical data:

Parameter	BRI-5,6	BRI-8,0	BRI-4,2
Productivity, daa/h	34 to 62	47 to 85	25 to 40
Working speed, km/h	6 to 11	6 to 11	6 to 11
Working width, mm	5600	7870	4200
Tilth depth, cm	3 to 7	3 to 7	3 to 7
Mass, kg	1015	1500	700
Number of working units	5	7	5
Number of working discs	80	112	60

SUNFLOWER HARVESTING HEADER HPS

The HPS sunflower harvesting attachment is an easy-to-use and maintain header, distinguished by its proven and reliable design. Its robust construction and low fuel consumption make it an excellent choice for any farmer looking to maximize their sunflower yield and efficiency. HPS is available in versions for simultaneous harvesting of 6 or 8 rows with a 70 cm row spacing.

Techical data:

Parameter	HPS6	HPS8
Working width, m	4,2	5,6
Rows	6	8
Row width, cm	70	70
Dimensions, mm
width	4490	5890
length	2960	2960
height	1380	1380
Mass, kg	1375	1830

ROTARY CULTIVATOR KRR - 6

The cultivator KRR-6 is designed to mechanize the manual tillage of row crops in the area around the plants. It involves loosening the soil, adding plant residues and fertilizers to the soil, as well as cutting and destroying weeds. It can work on areas with a slope of up to 8° with 6 rows planted with a 70 cm row width.

TECHNICAL DATA

- Machine type - sectional hitched
Dimensions in mm

length - 2010
width - 4640
height - 1300

- Mass, kg	1215
- Rows	6
- Tractor type	class 1,4
- Operating speed, km/h	5 – 10
- Operating width, m	4,2
- Output, daa/h	25 – 35

Marking

METAREM offers laser marking with a TRUMPF TruMark station 5000 of parts with maximum dimensions of 680 mm x 700 mm x 500 mm (L x W x H).

CORN HEADER PCR

Corn header PCR is a proven reliable assistant, distinguished by a rigid construction and low maintenance. It is designed to cut and feed the corn cobs to the combine, while the chopper cuts, slices, and collects the leaf-stem mass in a windrow or scatters it in the field. The machine can be used with all types of combines thanks to its interchangeable suspension frame.

Techical data:

	Parameter	PCR6	PCR8
1	Working width, m	4,2	5,6
2	Rows	6	8
3	Row width, cm	70	70
4	Minimum cutting height, cm	5	5
5	Dimensions,, mm
	width	4360	5760
	length	2830	2830
	height	1470	1470
6	Mass, kg	2300	3050

Приспособление за прибиране на царевица ПЦР6 за комбайн Claas

SUNFLOWER HARVESTING HEADER HSM

The header HSM 6 is designed for harvesting sunflowers at a constant high speed with minimal losses. Specially designed section covers retain the seeds, preventing their loss and ensuring maximum productivity per unit area. Its unique cutting system of two counter-rotating disc blades provides stem cutting without shaking the flower. The transport of plants to the auger is carried out by a conveyor chain with rubber pads, which grip the plants even in cases of lodged sunflowers.
The header can be attached to all combine brands through a replaceable suspension frame.

TECHNICAL DATA

№	Description	Value
1	Working width, m	4,2
2	Rows	6
3	Row width, cm	70
4	Dimensions, mm: width length height	4420 3000 1500
5	Mass, kg	1650±20

2-AXLE TRANSPORT TRAILER KT 2

Transport trailer KT 2 can transport different harvesting attachments as well as cutterbars for various harvesters. The supports are freely movable and can be easily replaced which allows different harvesting attachments to be transported with one trailer.

Колесар транспортен КТ 2 с конзоли за ПС8

CORN HEADER ACR

The ACR is a rigid and reliable corn header which allows fast harvesting speed whilst keeping the fuel consumption at minimum. The snapping rolls, equipped with four blades, chop the stalks before they are further broken down into smaller pieces by the main chopper. ACR is equipped with stalk crushers for protection of harvester tyres. Distance between stripper plates can be hydraulically regulated depending on the size of the incoming corn stalks. ACR is offered in a variant for simultaneous harvesting of 6 or 8 rows with row width of 70 cm.

Techical data:

Parameter	ACR6	ACR8
Working width, m	4,2	5,6
Rows	6	8
Row width, cm	70	70
Dimensions, mm
width	4400	5800
length	2900	2900
height	1370	1370
Mass, kg	2400	3050

Адаптер за царевица АЦ на изложението БАТА Агро

Deburring and finishing

METAREM offers services with a high-quality TimeSavers 42 RB Series machine with a working width of up to 1350 mm. The machine provides:

- uniform deburring of laser and plasma cut parts (burr and slag removal)

- perfect finishing

- edge rounding (up to 2 mm radius on mild steel)

Неръждаема стомана с дебелина 12мм преди зачистване

Неръждаема стомана с дебелина 12мм след зачистване

Bending

METAREM offers sheet metal bending with a TRUMPF TruBend 5170 machine.

Bend length depending on the thickness of material:

– up to 4 mm – 3000 mm
– from 5 to 6 mm – 2500 mm
– 8 mm – 1300 mm
– 10 mm – 1000 mm

Punching

METAREM offers processing of a wide range of parts thanks to a TRUMPF TruPunch 3000 punching machine. The machine allows perforation of sheet metal with a material thickness of up to 6 mm, making sieves and grids with different profiles. In addition to punching, the TruPunch 3000 provides the possibility of forming metal sheet details and cutting threads.

Laser cutting

The TRUMPF TruLaser 5030 fiber offers high processing speed and excellent part quality. Its' solid-state laser TruDisk12001 with 12kW laser power provides cutting of the following materials:

- mild steel and aluminium - 30 mm
- stainless steel - 40 mm
- copper and brass - 12 mm

Maximum workpiece dimensions - 1500 x 3000 mm

SUNFLOWER ATTACHMENT PS

The sunflower cutterbar PS impresses with an efficient picking concept which provides high output per unit area, minimal losses and ease of operation.

TECHNICAL DATA

№	Description	PS 12	PS 8
1	Working width, m	8,4	5,6
2	Rows	12	8
3	Row width, cm	70	70
4	Dimensions, mm: width length height	8640 2775 1100	5840 2775 1100
5	Mass, kg	2300	1650

METAREM produces header trailers for transporting your front attachments.